How to Wake on LAN With Ping

To remotely boot a computer on a network, you'll need a "Wake-On-LAN" supported network adapter. Once the adapter is installed, the computer can be "pinged" from another computer on the network to initiate the boot sequence. A ping is a signal sent from one computer to another and can be sent directly from the Command Prompt in Windows.

Step 1
Open the "Start" menu on the computer that will be pinged, then type "CMD" into the Search box and press "Enter."

Step 2
Type "ipconfig/all" then press "Enter." Make note of the following items: Physical address, IP address and subnet mask.

Step 3
Open the Command Prompt on the computer from which you will be sending the wake-on-LAN command. Type "ping" followed by the computer that you will be sending the wake-on-LAN command's IP address. For example, if the IP address is "192.168.1.1," type "ping 192.168.1.1" and press the "Enter" key. Look at the results and make note of the port number, if one is listed. If no port is listed, then by default, the port number is "7."

Step 4
Turn off the computer that will be remotely booted.

Step 5
Type "wolcmd" followed by the physical address, the IP address, the subnet mask and finally the port number into the Command Prompt. For example:

Computer A Physical Address: 009027a324fe IP Address: 195.188.159.20 Subnet Mask: 255.255.255.0 Port: 7

Enter "wolcmd 009027a324fe 195.188.159.20 255.255.255.0 7"

Step 6
Press the "Enter" key to send the command and boot the remote computer.

More about : lm hash generator

Comments

Post a Comment

Popular posts from this blog

Open Systems Interconnection

Different communication requirements necessitate different network solutions, and these different network protocols can create significant problems of compatibility when networks are interconnected with one another. In order to overcome some of these interconnection problems, the open systems interconnection (OSI) was approved in 1983 as an international standard for communications architecture by the International Organization for Standardization (ISO) and the International Telegraph and Telephone Consultative Committee (CCITT). The OSI model, as shown in the figure, consists of seven layers, each of which is selected to perform a well-defined function at a different level of abstraction. The bottom three layers provide for the timely and correct transfer of data, and the top four ensure that arriving data are recognizable and useful. While all seven layers are usually necessary at each user location, only the bottom three are normally employed at a network node, since nodes are conc
Read more

Bridging Network importance in cyber operations

  There are several ways to hook up individual computers into a network. One is to use hardware routers to link up the network segments. If you buy hardware bridges, those will also connect the computers with each other. In Windows XP, simply clicking the "Bridge Connections" icon joins parts of a network together, even if the parts use different media to link their segments. Advantages Using a router or a hardware bridge requires buying more equipment to connect your computers. With a wireless router, each computer and network segment needs its own Internet Protocol (IP) address in order to direct data to the right computer. Both methods may require an IT professional or experienced amateur to connect everything properly. With Windows XP, building a bridging connection requires just a few clicks of your mouse in the right places. Bridging To make a bridge, you must log in as an administrator on your network or your computer. Click the computer's "Control Panel,"
Read more

How to Connect a TV to a LAN

If your home has broadband service where you receive both TV and Internet over cable, you can use an LAN modem to transmit the cable TV signal to your TV set. You will need to have an LAN port on your TV, which many HD TV sets now come with. By connecting your TV set through a LAN, you can share your cable and Internet without having to deal with possible problems from a cable splitter, and you can free up the TV set's RG coaxial port for another possible connection. Step 1 Connect the cable running from inside the wall of your home to your cable modem's input port. This is the cylindrical threaded port much like the main port on the TV set. Step 2 Plug an LAN Ethernet cable into one of the output ports on the modem. Step 3 Connect the same cable to the LAN input port on your TV set. Step 4 Plug the modem into a wall socket. It often takes up to two minutes for the modem to fully power up. Step 5 Turn the TV set on. If the TV signal does not immediately appear o
Read more